3D
Track 02 · Water treatment
Arrange the equipment in your plant room
Before fixing a configuration, it helps to know whether the equipment fits the floor. Enter the plant room size, pick filters, RO skids, pumps, tanks and panels, arrange them yourself and connect the pipes. Then download an image, export a PDF, share the link, or attach the layout to a quote request so I can read your site faster.
Equipment library
Drag an item to move it · drag the floor to orbit · scroll or pinch to zoom
This browser has 3D graphics (WebGL) turned off, so the planner cannot run. Please try a recent Chrome, Edge or Safari, or send your room size through the Contact page.
Plant room
Selected item
Click an item in the room to edit its name, size, dimensions and position.
Items in the room
Piping
Select an item, press Connect pipe, then click the next items in flow order.
How to use it
- Enter the length, width and height of the plant room in the right panel.
- Click an item in the library to add it, then drag it into place. Items snap to a 5 cm grid.
- Click an item to select it: pick a preset size, type the real dimensions, rotate, duplicate or delete it.
- For an RO skid, set the element count, the vessel type (1 to 7 elements per vessel) and the vessel material. For UF and EDI, set the module count. The skid resizes to match.
- Piping: select the first item, press Connect pipe, then click the next items in order. Routes go around equipment, prefer to run along the back wall and alongside existing pipes. Click a pipe to change its DN size, stream type or route, or to delete it.
- Pressure filters need a drain line for backwash and regeneration, and membrane skids need a reject line. Press Add drain lines to connect them to a drain point: filter drains join one header that runs beside the membrane reject line.
- Export PDF gives an A4 landscape print with the 3D view, the plan from above and the equipment and piping schedules.
- Items that overlap, block a walkway or stand taller than the ceiling turn red.
- On a phone: tap to select, drag the selected item to move it, pinch to zoom.
- Shortcuts while an item is selected: R rotates 90°, arrows move 5 cm (50 cm with Shift), Delete removes, Ctrl+D duplicates, Ctrl+Z undoes.
About the dimensions
- Library dimensions are reference values for a first layout, not installation drawings. Real sizes depend on the maker and on each system configuration.
- Composite vessels are listed by nominal tank size, without the top valve and piping.
- Pipes are indicative right-angle routes that keep clear of equipment footprints, meant to show the run. Lengths are estimates and exclude elbows, tees and valves; pipe elevations, supports and access still need checking at installation design.
- Leave walkways and service space around the equipment, especially on the membrane pull-out side of an RO skid, in front of panel doors and where filter media is loaded. Use the Walkway, service zone item to reserve it.
- The layout is saved in your own browser and is not sent anywhere until you attach it to a quote request or share the link yourself.
